SOLIDWORKS 3D PRINTABLE PARTS - VEIOZA

Dupa cum se poate observa  piesele componente se fixeaza unele de altele ca un Puzzle.
Material aplicat in SolidWorks (puteti aplica ce material vreti) - POM Acetal Copolymer
Mass Property:
Mass properties of Assem1 ( Assembly Configuration - Default )


Mass = 11.84 grams
Volume = 8521.16 cubic millimeters
Surface area = 17198.98 millimeters^2
Center of mass: ( millimeters )

X = -70.90

Y = 42.39

Z = 69.07


Principal axes of inertia and principal moments of inertia: ( grams * square millimeters )

Taken at the center of mass.

Ix = (0.99, -0.04, 0.13) Px = 5598.38

Iy = (0.13, 0.00, -0.99) Py = 5601.45

Iz = (0.04, 1.00, 0.01) Pz = 6590.97



Moments of inertia: ( grams * square millimeters )

Taken at the center of mass and aligned with the output coordinate system.

Lxx = 5600.13 Lxy = -41.02 Lxz = 0.17

Lyx = -41.02 Lyy = 6589.24 Lyz = -5.20

Lzx = 0.17 Lzy = -5.20 Lzz = 5601.43



Moments of inertia: ( grams * millimeters )

Taken at the output coordinate system.

Ixx = 83393.15 Ixy = -35639.59 Ixz = -58004.91

Iyx = -35639.59 Iyy = 122639.00 Iyz = 34675.27

Izx = -58004.91 Izy = 34675.27 Izz = 86426.00
 
Pot realiza la cerere orice fel de componente in varianta 3D pentru printare 3D.
 
ATENTIE!! Nu realizez piesa la imprimanta 3D ci numai fisierul STL pentru printare 3D
 
Mai jos cateva pozici cu veioza: